Although most toilet problems require professional help, there are some problems that you can solve yourself. Knowing how and when to do this gives you more benefits, such as saving time and money. Once you are fully aware of the decisions you can make yourself, you no longer have to worry about paying professional remuneration. In this article, you will learn how to independently solve the main problems with the toilet. Here are Tips on Solving Common Toilet Problems
Clogged Bowl or Drain
If the bowl is full or filled with water, first remove it with a small or half bucket. Use the plunger to pump the drain several times until it is clogged is removed. Repeat if necessary if the first attempt failed. The best tool to unclog the toilet is the toilet plunger. Most people make the mistake of using a plunger to wash the toilet, not realizing that it is not strong enough to create the necessary suction force. It is a good idea to flush the toilet once it is unclogged completely. It will clean the toilet and make it ready to use. If clogging persists even after several dives, you should choose a professional plumber or house cleaning service and not spend more time solving the problem yourself.
A housecleaning service can be useful to solve many toilet blockages. They use some cleaning chemicals that are capable of dissolving papers. Always wear rubber gloves and clean the toilet bowl several times to remove chemicals. Try removing solid objects, rather than pushing them deeper into the ground pipe and causing drainage problems.
If you notice or notice a wet floor in the bathroom, especially around the toilet, check the vessel and check for cracks or leaks. To do this, you must first turn off the water supply to the toilet. Make sure the system is completely dry, then remove the toilet and replace it with a new one. This time carefully check the ship to make sure that the same defect does not appear again shortly. Carefully close the base to avoid leakage again.
One of the most common problems with a toilet is that it does not flush. If this happens in your bathroom, then you need to check its parts and the connection between them so that you know if everything works as expected. You may find that the handle is too loose or too tight, so you will have to adjust it. If the handle is locked or loose, remove the lid from the toilet, then clean the locknut to make the handle work properly and smoothly.
Fill Valve is Not Working
If the filling valve does not fill the tank properly or does not fill it at all, there may be problems with the valve. If the crane is easy to remove and clean, you can certainly do it yourself. You can find more information by following the instructions in the manual or go to the company’s website for more details. If nothing has changed and the problem persists, this may indicate a more serious problem with the pumping system.
As you can see, these basic problems with the toilet are not at all difficult to diagnose and solve. However, if you feel that you are not 100% sure how to approach a specific problem, immediately seek professional plumbing services, and do not try to do something that will only aggravate this condition.